TrackerV2 Working, but LoraWAN Sample from Website is Not

As you can see, the sodaq one works just fine with a multitech conduit and TTN when I am using the sodaq tracker v2 software. The problem is when I try to use the LoRaWAN_ABP_OTAA_SAMPLE found on the support site.

It just says OTAA init failed. What can I do to fix this? Is there any better example program out there?


In the zip file was an old Sodaq_RN2483 library used.
This version is not compatible with the latest IDE and latest RN firmware.

Copy the skech and install the latest libraries from git or the library manager.

Let me know if this solves your problem.


I updated my libraries and still get this error

Is there anything else I can try or add to debug it?

Uncomment #define DEBUG in the RN2483 library
You can find all libraries on your pc in Documents->Arduino->libraries
->Sodaq_RN2483->scr->Sodaq_RN2483.cpp is the file you want to edit.

And in the Arduino code uncomment
// LoRaBee.setDiag(debugSerial); // optional

This way all debug information from the rn module is showed.