SARA AFF R410M board test source code download

Hi,

I noticed that the device does a nice factory test on power on. It must have been loaded before shipping to customers. Nice! The output is:

08:27:03.171 -> [rdResp]: ATI9

08:27:03.171 -> [rdResp]: L0.0.00.00.05.08,A.02.04
08:27:03.171 -> [rdResp]: OK
08:27:03.171 -> [rdResp]: ATI9

08:27:03.171 -> [rdResp]: L0.0.00.00.05.08,A.02.04
08:27:03.195 -> [rdResp]: OK
08:27:03.195 -> OK
08:27:03.298 ->
08:27:03.298 -> ALL OK

Can somebody point me to the source code of this or post it? I cannot find it on the SODAQ GitHub namely.

Best regards,

Jaap

Hi @Jaap_Mulder,

All boards indeed are loaded with testsoftware with a test-rig when they are assembled.
We only sell devices who pass the tests.

We indeed don’t have this code on GitHub, we don’t have the intention to share it.
Why would you like to have this piece of code?

Best regards,
Jan

Hi Jan,
I am using the Universal Tracking source code as basis and will trip that down. So I am fine for the moment, but I would recommend adding the ‘board test’ software to GitHub as connecting own hardware can destroy parts on the board and it is nice to check if all onboard peripherals work.
Best regards,
Jaap

Hi Jaap,

Thanks for explaining.
I have created an internal message to see if we want to share the test code.

The Universal Tracker code is indeed a nice starting point which uses a lot of the onboard items.
We also have some basic examples on support.sodaq.com

Best regards,
Jan