FTDI Drivers for Windows 7

Hi there,
Could someone point me at the correct FTDI driver for the Sodaq One on windows 7.

When I first plug the device in windows scans and finds the sodaq, but no driver.

The SodaqONE uses the native USB of the SAMD21 MCU, it does not use an external chip (FTDI or otherwise) for communication with the host PC.

This is the same chip as on the Arduino Zero.

You can find some instructions here:
https://www.arduino.cc/en/Guide/ArduinoZero

You will want the instructions for the “Native USB port”.

Did you follow the steps under “Setting up your Arduino IDE” on our support page?
http://support.sodaq.com/sodaq-one/