Failed to upgrade NB-IoT deluxe from 6.56 to 6.57 firmware (solved)

Item to be removed… problem solved. Was not related to uBlox nor SODAQ technology.

I have the same problem…

My initial problem was due to a too slow PC, doing the same (Sodaq’s serialPassThrough.ino + uBlox UEUpdaterUI- on another PC worked fine for me.

Hi Guys,

I know that some computers need to have a reboot and start the UEUpdater as Administrator.
It will probaly not work on an office pc where your rights are limited.

Best regards,

Hi, FYI I was able to upgrade the firmware from 6.56 to 6.57 using an Arduino MKR1000, while with an Arduino Tian it doesn’t work.