SARA AFF R410M Universal tracker All Things Talk token too short

The Device Token required by All Things talk is too long to be put on the “att=” field in the Universal tracker
This is an example:
maker:4HJ2Rd839rRwW1VeVp5LdKAYTT5n1L0yCKyC5Ec
how can I solve?.
By the way the board connects OK to my server using UDP and my Italian provider, but no data on AllThingsTalk server.

Thanks

After some test I found that the UDP packet sent to the destination address is completely different from what required by AllThingsTalk protocol that says:
“A packet sent by the UDP client should be formatted as follows:
DeviceID NEWLINE_CHARACTERDeviceToken NEWLINE_CHARACTERDeviceState”
If I send a correctly formatted packet (using UDP tool) the data shows OK on the dashboard.
So it seems that the format is changed since the Universal Tracker code was written.
Did someone had the same problem and how can I test the AFF R410M board with the Universal tracker?.
Thanks

Hi @mcolombo,

There are different ways to send to AllThingsTalk.
Under the tab connectivity there is a short token you can use.
If you don’t have a short token in the connectivity tab please send your IMEI to support@sodaq.com

Best regards,
Jan