Cannot attach SARA AFF R410M to Vodafone network (Netherlands)

Hi,

I bought a SARA AFF R410M with Vodafone SIM card (in the Netherlands)
I connect the PC to the USB port of the SARA to listen, how it tries to connect to the network, but the module does not succeed. Here is the log:

SODAQ SARA R4 MAKER 20190315.1
Booting up…
Configuration not changed
Initializing…
Initializing GPS…
Sensor read sequence started…
Temperature: 24.00 C
Battery voltage: 4334 mV
Uploading…

AT+CGATT?
<<
<< timed out

AT
<< timed out

AT
<< timed out

AT
<< timed out

AT
<< timed out

AT
<< timed out

AT
<< AT
<< OK
<< timed out
<< timed out

AT+CMEE=2
<< AT+CMEE=2
<< OK

AT+UGPIOC=16,255
<< AT+UGPIOC=16,255
<< OK

ATE0
<< ATE0
<< OK

AT+CFUN?
<< +CFUN: 1
<< OK

AT+UMNOPROF?
<< +UMNOPROF: 19
<< OK

AT+URAT?
<< +URAT: 8
<< OK

AT+UBANDMASK?
<< +UBANDMASK: 0,524420,1,128
<< OK

AT+COPS=3,2
<< OK

AT+COPS?
<< +COPS: 0
<< OK

AT+CGDCONT?
<< +CGDCONT: 1,“IP”,“nb.inetd.gdsp”,“0.0.0.0”,0,0,0,0
<< OK

AT+CSQ
<< +CSQ: 99,99
<< OK
… 33 more AT+CSQ resulting in +CSQ: 99,99

AT+CSQ
<< +CSQ: 18,99
<< OK

AT+CGATT?
<< +CGATT: 0
<< OK
… 35 more AT+CGATT resulting in +CGATT: 0

AT+CPWROFF
<< OK
… after one more try this whole sequence, it ends with:

AT+CPSMS=0
<< OK

AT+CEDRXS=0
<< OK
Upload Failed

How can I solve this problem?
Thanks in advance!

Wim

Dear @Wim,

I believe @S.Veldwijk already swapped the board + latest version of the software.

If other people have issues with not connecting the latest firmware can be found on the vodafone/sodaq support page.

https://vodafoneiot.sodaq.com/quick-start/next-steps/

Best regards,
Jan